Home
Contacts
Products
CAD drawings
New products
Press
Video
Solutions
Downloads
News
Newsletter
Link
News - Events
In-line, FCL, FPL and FIL filters
These small in-line filters retain impurities and very fine dust, interfering with the flow rate in a negligible manner.
Thanks to their reduced size, they can be directly installed onto vacuum piping, close to the utilities (vacuum cups, vacuum clamping systems, etc.) for a fractionated...
New bellows vacuum cup 01 05 09
Vuototecnica presents the new bellows vacuum cup code: 01 05 09
In its ½ bellows shape, it is widely used in the Pharma and Packaging sector for gripping e.g. ampoules, syringes, tablets, capsules, etc.
They are characterised by their flexibility and adaptability of...
Vacuum cups SV series (STAR VACUUM)
The SV series of vacuum cups (STAR VACUUM) has been developed for handling flat and flexible objects such as cardboard layering pads or thin metal sheets without deformation, by virtue of the rubber reinforcement sectors inside these vacuum cups, which characterise their star-shaped bearing...
In-line, FCL, FPL and FIL filters
These large in-line filters retain impurities and very fine dust, interfering with the flow rate in a negligible manner.
They are composed of a cylindrical transparent Plexiglass body closed by two anodised aluminium flanges kept in place by Seeger rings, where all the threaded male or...
Vacuum regolators
These devices control the level of vacuum, maintaining it constant at the pre-set value (secondary vacuum), regardless of the network’s flow rate and the fluctuations in vacuum level (primary vacuum).
They operate by membrane-piston and exploit the pressure differential between the...
Vacuum regulators with pneumatic adjustment
Vacuum regulators with pneumatic adjustment differ from the previous ones for the way they adjust the level of vacuum; in fact, instead of acting manually on the adjustment screw, it is necessary to act on the pneumatic cylinder compressed air supply: the higher the pressure, and the higher the...
Pneumatic coaxial shutter valves
The function of these solenoid valves is to intercept the compressed air supply to the vacuum generators. Interception through an original coaxial shutter allows the supply of large quantities of air, thus ensuring greater gripping speed of the vacuum cups.
They are composed of an...
VACUMANAGER VM series power supply unit
VACUMANAGER VM series units are integrated electro-pneumatic circuits designed to supply and manage single-stage and multi-stage vacuum generators.
VM units house the following in an anodised body/distributor machined from billet aluminium:
- 1 Digital vacuum switch with...
New series of 2-way and 3-way vacuum solenoid pilot valves with 1/8 "gas suction section
These direct-drive valves have been specially designed for vacuum and are normally closed. They are composed of an anodised aluminium body, where the connections and the passage mouths are located, and of an actuator which is activated by an electric coil. The solenoid pilot valve shutter in NBR...
News! Electrical equipment for vacuum tests ATC01
This device has been made mainly to test the air-tightness of compostable capsules, although it is possible to test any kind of material that can be placed inside equipment.
The principle of operation is based on the detection of capsule deformations, under the direct action of the...
Special PH and P2H suction plates for OCTOPUS systems
The special suction plates PH and P2H can be installed on OCTOPUS systems to replace the PX and P2X plates.
They are made of anodised aluminium sheets with holes equidistant from each other and coated with a special sponge rubber, microperforated at the holes in the aluminium sheet, in...
Switchgear equipped with touch screen operator panel
The new electrical equipment consists of a touch screen, which is a special electronic device that is the result of combining a screen and a digitizer that allow the user to interact with a graphical interface using their fingers or specific objects.
The touch screen operator panels...
New direct drive, high flow 2-way vacuum solenoid valves
These direct drive two-way, two-position vacuum solenoid valves in the new series feature a conical shutter servo-controlled by the vacuum.
They are normally closed, but they can be supplied normally open upon request.
They are composed of an anodised aluminium body where the...
Single-stage vacuum generators with ejector FVG 8 and FVG 12
Specifically designed for very high frequency gripping and release applications, these single-stage vacuum generators are based on the Venturi principle and are equipped with a pneumatic ejector, which can be implemented on request through the M7 connection on the lid, to allow maximum speed in...
Special vacuum cups for the pharmaceutical sector
These vacuum cups have been designed and manufactured for the pharmaceutical sector.
They are used for handling syringes that are filled with liquid and capped during their transfer, making use of the internal passages on the special supports (not supplied) on which they are fitted.
...
Vuototecnica is on TraceParts: CAD designs available online
The Vuototecnica catalogue is now available on TraceParts, an online 3D cataloging service, an easy-to-consult platform.
Thanks to TraceParts, its compatibility tools in various CAD formats, its multi-language interface and 24/24 accessibility, Vuototecnica arrives on the screens...
New Vacupredator suction cups, ready to “bite”
Designed to facilitate robot integrators in one of the most difficult tasks in the field of handling in the packaging sector, they are perfect for picking up bags and flow packs, which are difficult to take by traditional rubber suction cups due to their flexibility.
The suction...
New digital vacuum switches with two-colour display
These new digital vacuum switches with two-colour display are enclosed within a robust ABS container. They are carefully calibrated and at compensated temperature, ensuring high-precision measurement values.
Detected values are viewed on the main two-colour (red and green) display and...
Single-stage and multi-function vacuum generators, MSVE series
The vacuum generators of this new series can fully drive a negative pressure gripping system.
By means of coaxial shutters, the original compressed air supply system feeds large quantities of air to both the ejectors and the ejection system, thereby ensuring faster gripping and...
New digital vacuum switches
These new digital vacuum switches made with ABS body are really compact and extremely light to allow for its installation on board automatisms and near use.
These carefully calibrated devices are able to provide very accurate measurement values. The detected values are shown on the...
Flat and bellow elliptical suction cups with relative supports
Vuototecnica offers you a complete range of flat elliptical suction cups, normally used for gripping, handling and clamping cardboard cases and boxes, wood shingles, small ceramic or brick tiles, iron or stainless steel profiles, sheets and anything else present on long, narrow gripping...
Production Programme
The Vuototecnica brochure about the Production Programme is available in the Download section.
Two bellow suction cups for heavy-duty packaging
Vuototecnica has devised the all new two bellow suction cups for the handling of especially heavy cardboard boxes and packaging in the packaging sector.
These suction cups are able to compensate for the gripping height with a greater recovery of the unevenness of the load to be...
Bellow suction cups for the gripping of flowpack packaging
Created from experience, Vuototecnica welcomes the new increased performance bellows suction cups 01 30 45 S.
Especially suitable for installation on automatic, high production machines in the packaging sector, equipped with a grip lip designed to be extremely flexible, able to...
New rotary vane vacuum pumps, RVP series
Vuototecnica is proud to present a new range of rotary vane vacuum pumps, RVP.
It is an innovative product, which is technically complete in its standard equipment, built with the latest generation materials and at high standards of quality. It has a very high efficiency, and it is...
New solenoid valves for vacuums, for faster responses
A new, fully innovative series of solenoid valves for vacuums to guarantee exceptionally low response times have been created from Vuototecnica research and experience.
They are three-way vacuum solenoid valves, pilot-operated for capacities exceeding even 200 mc/h: They are used for...
Single-stage vacuum generators FVG 3-5 with ejector
Specifically designed for very high frequency gripping and release applications, these single-stage vacuum generators are based on the Venturi principle and are equipped with a pneumatic ejector to allow maximum speed in restoring the atmospheric pressure of use.
The key features...
Cartridge vacuum generators PVR 1-4
• Can be directly integrated on suction gripping parts of the packaging machines
• Maximum output at low operating pressures (2 - 3 bar)
• Maximum vacuum level: -70 KPa
• Flow rates of 1 or 4 m3/h
• Their shape enables the suction of dust or small...
New FB28 suction filter with metal cartridge
The new FB28 suction filter with metal cartridge replaces the FB25 filter, no longer in production. Both attacks (G3/4") and capacity (40 cum/h) remain the same while size and weight are different (see the attached datasheet).
Preventing impurities from reaching the vacuum pump is...
Micro cup holders 20 80 05
• Extremely reduced size and weight
• Stainless steel stem and spring
• Self-lubricating bush built in the threaded sleeve ensuring a perfect sliding of the stem and durability
• Indicated for Pick & Place units and handling machines for unloading plastic objects from...
PVP SSX single-stage vacuum generators
• Available with 9, 14 and 18 cum/h
• 150 mbar abs. final pressure
• Standard stainless steel ejectors
• EPDM seal
• Fully made with anodised aluminium
• Equipped, as a standard, with the new SSX free-flow silencer high acoustic dampening reduction,...
Ball joint couplings with GSL axial vacuum connection
This series of couplings was designed to be installed on suckers with support, especially those that are flat or that have little lip, in order to allow them to easily adapt to the gripping surface of the load to be picked up, even if not perfectly parallel to the plane of the sucker itself or to...
New Vuototecnica brochures
New Vuototecnica brochures about the Production Programme and the Octopus Bars are available in the Downloads section.
Octopus gripping bars now even lighter!
Anthropomorphic robots and palletising systems manufacturers require increasingly flexible vacuum gripping systems.
Vuototecnica meets this requirement of extreme lightness with the new OCTOPUS gripping bars made of polizene, a plastic material that reduces the overall weight by...
When the vacuum generator is extremely compact
It’s the new PVP 05 single-stage vacuum generator. Its distinctive feature is the particularly reduced size compared to the performance it offers.
Vuototecnica has designed and created it for all applications requiring extremely compact equipment.
The new PVP 05...
A Leader in Vacuum Control
There are situations in which the use of an instrument able to provide an accurate signal once a certain vacuum level has been reached is recommended for safety purposes; such situations include the starting of a work cycle, or checking the grip of suction cups, etc.
Vuototecnica...
Traditionally innovative: the new Bernoulli vacuum cups
Vuototecnica research has led to the creation of a new range of vacuum cups based on Bernoulli’s principle.
These new vacuum cups are ideal for handling, without any contact, fragile, uneven or microperforated objects, such as semiconductor platelets, silicon disks, solar cells, precious...
Maxigrip Cups
[high friction coefficient for a firm and secure grip]
Designed as an alternative to the more common cups used in the robot-automotive sector, they can offer excellent solutions to gripping and handling problems presented by the relative devices in all industry...
