There are situations in which the use of an instrument able to provide an accurate signal once a certain vacuum level has been reached is recommended for safety purposes; such situations include the starting of a work cycle, or checking the grip of suction cups, etc.

Vuototecnica designs and manufactures several vacuum measurement and regulation systems. Among these are micro digital vacuum switches that are able to provide a very accurate digital signal at the maximum measurement value set. Its moderate dimensions are especially suitable for installations near suctions or where the vacuum distribution is confined to very limited spaces.

AVG series vacuum generators, designed specifically for the automotive sector, are already set for micro vacuum switch installation when supplied.

The digital micro vacuum switches supplied by Vuototecnica have a commutation point, included within the scale value that is easily programmable using an adjustment screw located on the upper side of the device; a red LED near the screw indicates the commutation status of the digital output signal.

The pressure differential (hysteresis) between the set maximum value and the reset value of the rest signal, is equal to 2% of set value and cannot be adjusted.


有些情况下因为使用安全的问题建议启动吸盘手柄等等控制工作循环.- 该工具可以准确显示所达到的真空等级.
Vuototecnica设计制造了多个测量和调整真空的系统。
其中数字微型真空开关可以准确调节所提供的数字信号，可以达到最大设置值。由于设备的尺寸小，因此特别适合安装在吸盘附近或者真空分配区域的空间狭窄的特殊情况。
AVG系列真空发生器，是专为汽车行业开发生产的，已经预安装为了达到微型真空状态。
Vuototecnica提供的的数字微型真空状态提供切换点，包括进入等级制，可以通过位于设备表面的调节螺丝非常容易的进行调节；LED红色，表示数字输出的开关状态。
压力差距（滞后现象）存在于最大设置值以及恢复值得差额，恢复信号等于设置值的2%，不可以调节。